Rx Frequency Range: 30 kHz - 56 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±0.5 ppm (after 1 minute @+25 °C)
±1.0 ppm (after 1 minute @–10 °C ~ +50 °C)
Operating Temperature Range: –10 °C ~ +50 °C
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps: 1/10 Hz (SSB, CW, & AM), 100 Hz (FM)
Antenna Impedance: 50 Ohms, unbalanced
16.7 - 150 Ohms, unbalanced (Tuner ON, 160 - 6 m Amateur bands, TX only)
Power Consumption (Approx.): Rx (no signal) 1.8 A
Rx (signal present) 2.1 A
Tx (100 W) 22 A
Supply Voltage: DC 13.8 V ± 10% (Negative Ground)
Dimensions (WxHxD): 14.4” x 4.5” x 12.4”
Weight (Approx.): 28.7 lbs

Transmitter
Power Output: 5 - 100 watts (2 - 25 watts AM carrier)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance

Receiver
Circuit Type: Triple-conversion Superheterodyne
Intermediate Frequencies: 69.450 MHz/450 kHz/30 kHz (24 kHz for AM/FM)

FT-950

HF+6 transceiver - Price € 1395.00

Now includes additional features of PEP950 - Performance Enhancement Program

The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the needs of both casual and serious DX enthusiasts, as well as new HF licensees eagerly seeking to discover the magic of the HF and 50MHz bands. Prospective owners will find that this radio comes in an appropriately-sized desktop package that provides them with loads of easily located controls and features to ensure they enjoy all of the excitement available on the 160 through 6 meter Amateur Radio bands.

160 - 6 meters, 100 Watts of Reliable Power from a cool radio!
Solid SSB and CW power on 160 through 6 meters adjustable in increments from 5 watts to the full 100 watt output. AM - 5 to 25 watts output. • Ultra-stable and high-power Final Amplifier Stage incorporates a high efficient reliable RD100HHF1 MOS FET in a push-pull configuration, using a supply voltage of 13.8 V, cooled by a huge 1400 cc die-cast aluminum heat sink with a high coefficient of thermal conductivity. • A thermostatically-controlled 2.35"/60mm axial cooling fan engages at 40 deg C/104 deg F, and it features four speeds, depending on the degree of cooling required. The large bearing surface of the fan, its floating mount, and the unique heat sink design combine to make the cooling system incredibly calm and quiet, yet very efficient.

General Coverage Receiver 30 kHz to 56 MHz
Enjoy the full range 30 kHz to 56 MHz general receiver coverage of the FT-950 for shortwave listening across the HF spectrum.

High Speed Automatic Antenna Tuner
The 100 memories of matching-point data make it possible for you to tune around the bands without the need to re-tune as you go. The special antenna tuner memories ensure efficient operation, as well as lightning-fast matching at new operating frequencies, as needed.

Alinco Dr-635
FT 7800 - €499.00 includes VAT

Features of DR-635T/E:
(Note: A suffix "V" such as DR635TV may be stamped on the package, but this code is only for our internal inventory purposes therefore please disregard.The unit is marked as DR635T or E on the serial-number plate.)

VHF/UHF full duplex operation includes V/U and U/V modes. Cross-band repeater function (where permitted: standard on DR-635T) 200 Memory channels H/M/L power output settings- VHF: 50/25/5W UHF: 35/20/5W Large 6 character alphanumeric display Selectable display color illumination (Blue, Violet or amber) Internal duplexer - single antenna connector Removable control head can be remotely mounted or allow transceiver to be inverted for optimal speaker placement Expanded receive range includes FM broadcast band (WFM) Power supply voltage display Theft alarm feature Optional 1200 and 9600 bps packet operation with optional EJ-50U Digital voice communications with optional EJ-47U Optional illuminated DTMF EMS-57 microphone (included with DR-635T) allows direct VFO frequency entry and remote control of transceiver CTCSS & DCS encode and decode plus four different tone bursts CTCSS Tone and DCS scan Programmable VFO and Memory scan modes "Time Out" timer Cable Clone feature AM Aircraft band reception (DR-635T only) Temperature Compensated Crystal Oscillator Ignition key activated power on/off feature

Freely and separately selectable display colors for TX/RX/Stand-by! Shown with an optional EDS-9 separate kit and EMS-57 microphone (EMS-53 plain type is standard for E-version). Standard Accessories: * Microphone (EMS57/EMS53 depending on the version) * DC cable * Bracket Hardware pack * ACC port cable * Sticker * Instruction Manual Optional Accessories * EJ-47U digital modulation uint * EJ-50U TNC unit * EDS-9 Front-control unit separation kit

Vertex Standard VXA-300 / Pilot III €299.00

Professional-Grade Airband Transceiver with Navigation Display

The Vertex Standard VXA-300 is a compact, stylish, solid hand-held transceiver providing communication (transmit and receive) capability on the International Aircraft Communication Band ("COM" band: 118 ~ 136.975 MHz), and it additionally provides VOR and CDI navigation features on the "NAV" band (108 ~ 117.975 MHz).

The VXA-300 boasts 0.8 Watt of clean audio output from its 1.4" (36-mm) diameter loudspeaker, and it also provides 8.33 kHz synthesizer steps for the receiving of the new narrow-band channel plan. The VXA-300 includes both Temperature and Supply Voltage displays with our exclusive Omni-GlowTM display back-lighting for minimal degradation of your night vision, NOAA weather band monitoring, 8-character Alpha/Numeric Display, 150 Memory Channels, and up to 100 "Book Memory" Channels. The channel configurations are can be easily reprogrammed in minutes using the optional PC Programming Kit and your PC.

• 5 watt TX output power
• 8.33 Khz channel spacing (RX only)
  
• Built in VOX (voice activiated) for "hot mic" that is fully adjustable
  
• Nav-Comm display
  
• 200 memory channels with 8 character alpha-numeric titles
  
• NOAA weather receive
  
• Back lit keypad and display
  
• Built in P.A. mode
  
• Extra large LCD display (30% larger display characters)
  
• One touch squelch adjustment
  
• Receive battery saver (extends battery charge life)
  
• Three (3) Year Parts and Labor Warranty

Comes supplied with NiMh battery (1400 mah), Wall Charger, Headset Adapter, Belt Clip and Flexible Antenna.

Frequency Range
TX 118.000 - 136.975 MHz (COM Band), RX 108.000 - 117.975 MHz (NAV Band), RX 118.000 - 136.975 MHz (COM Band), WX channels WX-01 - WX-10 8.33 Khz channel spacing.

Power Output
5.0 W (PEP), 1.5 W (Carrier Power) @ 7.2 V DC 800mw audio amplifier.

Vertex Standard VXA-220 / Pro VI €299.00

Vertex Standard’s newest addition to the submersible airband portable !

The Vertex Standard VXA-220 Pro VI is a compact, stylish, solid and submersible hand-held transceiver providing communication on the International Aircraft Communication Band. Additionally, it provides receive on the Navigation Band.

The VXA-220 boasts 700 mW of clean audio output and it also provides 8.33 kHz synthesizer steps for the new narrow-band channel plan.

The VXA-220 displays information with our exclusive Omni-GlowTM display back-lighting for minimal degradation of your night vision. Also, NOAA weather band monitoring, 8-character Alpha/Numeric Display, 150 Memory Channels, and 100 “Book Memory” Channels are included.

FEATURES:

• 5 watts TX output power (at 9.6VDC. 3.5W PEP typical, 1.5W carrier)
  
• One-Touch Control Knob for easy access to VFO, Memories, and Weather
  
• 3-way Display Titling (frequency, channel number, or 8 character tag)
  
• Internal Sidetone Function when used with aviation headsets.
  
• 250 Memory Channels – Includes 150 Programmable Memories plus 100 Book Memory Channels.
  
• Automatic Noise Limiter. Acts to reduce impulse noise from engine ignition systems.
  
• One-Touch Emergency Frequency Access. Just press the [121.5] key for instant operation on the VHF airband emergency frequency.
  
• Priority Dual Watch Function (A Vertex Exclusive!)
  
• RX Battery Saver with adjustable save levels.
  
• Water Resistant Construction
  
• NOAA Weather Broadcast Receive. All 10 weather broadcast channels are
  pre-programmed into a special memory bank. The VX-220 will automatically scan this special bank to find the active broadcast in your area.
  
• Automatic Active Weather Broadcast Locator (A Vertex Exclusive!)
  
• Low Battery indicator
  
• 3 Year Warranty
  
• Power Output
  5.0 W (PEP), 1.5 W (Carrier Power) @ 7.2 V DC 800mw audio amplifier.

Price € 399.00 Yaesu Vx-7R Amateur VHF/UHF transceiver

The Yaesu VX-7R is a triple band (6M, 2M & 440 MHz) HT with extensive receive coverage, and leading-edge features. The American version even transceivers with 300 mW on the 220 band. Power output on 6 meters, 2 meters and 440 MHz is 5/2.5/1/0.5 watts. It receives the AM and FM broadcast bands, shortwave (AM), VHF and UHF TV audio, VHF Air and public service frequencies. This new model features a rugged magnesium case with rubber bumpers and gaskets. It clearly sets the standard in ruggedness, versatility and water resistance. It is actually submersible (3 feet for 30 minutes). There is even an optional submersible speaker mic. The Yaesu display at the Dayton Hamvention 2002 featured the VX7R submerged over 1 meter and powered for over 8 hours!

Frequency range:
TX: 50-54 / 144-146 / 430-440 MHz (Europe)
TX: 50-54 / 144-148 / 222-225 / 440-450 MHz (USA)
RX: 0.5-999 MHz (Cellular blocked in the US)

Mode: TX: AM/FM | RX: AM/FM/WFM

RF Power output:
Hi: 5/5/5
Low3: 2.5/2.5/2.5 W
Low2: 1/1/1 W
Low1: 0.5/0.5/0.5 W
0.3 W (220 MHz, FM), 1 W (50 MHz, AM)

Sensitivity: N/A
Selectivity: N/A
Image rejection: N/A

Voltage: 7.2 VDC (internal), 10-16 VDC (external)
Current drain: RX: 25-200 mA
TX: 0.6-1.8 A

Impedance: 50 ohms, SMA

Dimensions (W*H*D): 60*90*28 mm
Weight: 250 gr
Manufactured: 2002-200x
Other: 500 memories. Waterproof/submersible. Twin RX

Hongda HD-K4AT - Amateur VHF Price € 199.00

1. Memory frequency channels: 99
2. Manual Program (LCD display)
3. Talking distance: 3-10KM
4. Channel spacing: 12.5KHz, 25KHz
5. Output power: 5W/1W
6. Frequency range: 400-470MHz
8. CTCSS(QT) / CDCSS(DQT)
9. Scan feature
10. Weight: 230grams
11. Measurement exluding antenna: 117*56*42mm

DJ-195 - Amateur VHF Price € 179.00

Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/196 sports an alphanumeric display for easy memory management. It has an ergonomic design that's "user friendly" and the 5 watt output battery is standard. You'll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/196 retains the proud Alinco tradition of quality construction and excellent value.

Freq. RX original status 130 to 174 F2 F3 only
F2,F3,WFM

•  Freq. TX 144-147.995

•  Freq. Stability +/-5ppm(-10 to +60c)

•  Antenna Imp. 50 ohm unbalanced

•  Supply Voltage DC 13.8V rated

•  DC 6.0min to 16V max

•  Ground Negative GND

•  Current consumption TX 5W 1.2A approx.

•  at 13.8V external source RX 200mA approx/300mW

•  RX squelched 50mA approx.

•  RX Batt.Save on 20mA app.

•  Operating Temp. range -10 to +60 degrees C.

•  Dimention w/o projection 56(W) x 124(H) x 40 (D)

FT-897D

HF/VHF/UHF transceiver - Price € 795.00

The FT897D has been purpose built into a rugged die-cast aluminimium box especially for heavy-duty operation. It is powered from a variety of sources from 230V AC, to Ni-MH (optional) or from an external 13.8V DC supply. Despite its ultra compact size the FT897D is never-the-less a high performance 100W HF+ 6m, 50W 2m and 20W 70cm transceiver. It covers most of the major modes and is very easily controlled from the front panel.The tuning knob is in the centre of the front panel of the rig with the rest of the controls ergonomically placed either side. Apart from the microphone and headphones the rest of the sockets are out of the way on the rear panel. A feature picked up from the FT817ND is the multi-coloured dot-matrix display. This has proved an invaluable aid not only in displaying the frequency but other details as well such as a spectrum scope.

•  HF + 6m, 2m, 70cm (Amateur Bands) Tx

•  Gen Coverage Rx * CW, SSB, AM, FMN, FMW, PACKET, DIGITAL

•  HF/6m 100W, 2m 50W, 70cm 20W

•  Internal AC Power Supply or Ni-MH (optional)

•  200 memories with Alpha Numeric Tags

•  Spectrum Scope

•  ATAS-120 compatible

•  External FC-30 Automatic ATU available

•  DSP built-in * Large Multi-colour Dot-Matrix LCD

•  IF Noise Blanker, IF shift control

•  Built-in 3-message memory keyer

•  Collins 500Hz 12-pole Mechanical Filter (Option)

•  CW Training feature

•  1.5W audio (4 - 8 Ohms)

•  w/AC or 13.8V DC or Ni-MH battery

•  200 x 80 x 260mm * Weight (approx.

Alinco Dr-135

price €299.00

Features of DR-135T/EMKIII

• Revised NEW circuit to be compliant to RoHS/Lead-free order in EU.
• Voice-only FXE-version available (European model only, EJ-41U/47U not usable).
• EJ-41U internal TNC board is available as an option for 1200/9600bps packet
• 50 watts, H/M/L power settings
• 100 memory channels
• Front panel data port
• Rear panel DSUB9 computer connection
• No need to remove mic for packet operation
• Ignition key on/off feature
• CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
• Clean, clear Alinco audio
• Super-wide 7 character alphanumeric display
• Wide and narrow FM modes (16K0 & 8K50F3E)
• Theft alarm feature
• A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
• Stays in mode you select (voice/packet) through
  power off cycles
• Ten autodial memories
• and more....at Low Alinco price!

Icom IC-A6 €449.00

Easy to use while flying

Simple one-handed operation is the most essential feature of the IC-A6. The well labeled, large keypad provides user friendly operation. The large display shows both letters and numbers and is easy to see, making for fast frequency recognition. The display is backlit, and so is the keypad. The light stays on until you turn it off – a very handy feature for flying at night.

• Frequency Coverage
  Tx 108.000-117.975 MHz
  Rx 118.000-136.975 MHz
  Weather 161.650-163.275 MHz
  
• Channel spacing 25 kHz
• No. of memory channels 200 (20 Channels X 10 banks)
  
• Power supply requirement
  7.4/7.2V DC (Battery pack)
  11.0V DC (External DC jack)
• Frequency stability ±5 ppm
• Operating Temperature Range -10°C to +60°C
• Dimensions (W×H×D)(projections not included)
  54(W) x 129.3(H) x 35.5(D) mm;
  21/8(W) ×53/32(H) × 113/32(D) in
• Weight 430 g; 15.2 oz (with antenna and BP-210N)
• Antenna connector 50Ω BNC type
  
  Transmitter
  
• Output power (at 7.2 V DC)
  5.0 W typ. (PEP)1.5 W typ. (CW)
• Modulation system Low level modulation
  Modulation limiting 70-100%
  
• AF harmonic distortion Less than 10% (at 60% mod.)
  
• Hum and noise ratio More than 35 dB
  
• Spurious emissions More than 46dB (Except operating freq. ±62.5kHz point)
  
• Microphone impedance 3-conductor 2.5 (d) mm (1/10″) / more than 100kΩ

€299.00

Aviator Pilot tranceivers by Yaesu are the result of over 40 years of engineering experience in communications and handheld tranceiver design.

The Aviator series are the world's only airband tranceivers that are rugged enough to pass stringent MIL-STD 810 testing. The durable high impact housing and unique clam shell chassis assures reliable operating adverse conditions. And Yaesu's extensive rubber gasketing system around the housing seams, key pad, knobs, microphone jacks and speaker grill insures that the Yaesu Aviator sets a new standard for water resistance among airband tranceivers available today!