• Sensitivity: Better than 0.2 uV (12 dB SINAD)
• Voltage: 13.8 VDC +/- 15%
• Selectivity: 8 KHz (-6 dB), 30 KHz (-60 dB)
• Dimensions (W*H*D): 140*42*168 mm
• Impedance: 50 ohms, SO-239
• Current drain: RX: 0.5-? A
  TX: Max 8.5 A

YAESU FT 8800

€699.00 includes VAT

144/430 MHz Dual Band FM Transceiver

If you're ready for the best in a Dual-Band FM Mobile Transceiver, the FT-8800R is ready for you! With easy operation, outstanding receiver performance, and crossband repeat capability, the FT-8800R is the new standard of comparison

• Antenna Impedance: 50 Ohm, Unbalanced
• Frequency Stability:±5 ppm (-10°C to +60°C, VHF)±5 ppm (+10°C to +60°C, UHF)

• Supply Voltage:DC 13.8V ±15%, Negative Ground
• Case Size:5.8x1.9x7 inches (140x38x166 mm)
• Weight:Approx. 2.2 Lbs (1.0 kg)

Yaesu FT-7100M VHF/UHF Mobile unit

Price €649.00 includes vat

The Yaesu FT-7100M dual band mobile brings you the ruggedness and operating ease of our single band mobiles and the convenience of remote head mounting capability in an all new design. Extended receive coverage provides monitoring of both public safety and the VHF air band [AM]

The main memory of the FT-7100 includes 240 channels (120 channels per band). Plus you get 5 pairs of programmable band limits and a one-touch Home channel on each band. Each memory stores frequency data plus CTCSS or DCS frequency and operating status, and repeater shift is also memorized. A six-character alphanumeric label may be appended to each memory (upper display field: 5 characters). Sophisticated scanning is also supported. You get: VFO scan, Memory scan, Programmable Memory scan (PMS) with user-defined limits, and you designate can channels to be skipped during memory scan. You also get Yaesu's unique Smart Search™ automatic memory loading system, which sweeps a portion of the band, automatically loading active frequencies into a special 50-channel Smart Search™ memory bank. You also get 3 priority channel modes.

Yaesu VX-2E

Price € 399.00

Type: Amateur VHF/UHF transceiver

Frequency range: TX: 144-146 / 430-440 MHz (Europe and Asia) TX: 144-148 / 430-450 MHz (USA) RX: 0.5-999 MHz (cellular blocked in the US) Mode: TX: FM RX: AM/FM/WFM RF Power output: 1.5-3 / 1-2 W Sensitivity: N/A Selectivity: N/A Image rejection: N/A Voltage: 3.2-7 VDC Current drain: RX: 20-150 mA TX: 1.2-1.8 A Impedance: 50 ohms, SMA Dimensions (W*H*D): 47*81*23 mm Weight: 182 gr (with battery and antenna) Manufactured: 2003-200x Other: 5000 memories. CTCSS, DCS, DTMF & ARTS

• Dual-Channel "Priority" Operation
• VOX (optional VC-25 Headset required)
• RF Squelch Only responds to signals exceeding user-set signal strength
• Channel Counter Searches for frequency of strong nearby station
• Automatic Repeater Shift (ARS)
• ARTS™ Auto-Range Transponder System
• Busy Channel Lock-Out (BCLO)
• DC Voltage Meter
• Wide/Narrow Deviation Setting
• Cloning For quick transfer of programming data between two VX-2 series
• 1750 Hz Tone Calling For European Repeater Access

Price € 699.00

Amateur VHF/UHF transceiver

The Yaesu VX-7R is a triple band (6M, 2M & 440 MHz) HT with extensive receive coverage, and leading-edge features. The American version even transceivers with 300 mW on the 220 band. Power output on 6 meters, 2 meters and 440 MHz is 5/2.5/1/0.5 watts. It receives the AM and FM broadcast bands, shortwave (AM), VHF and UHF TV audio, VHF Air and public service frequencies. This new model features a rugged magnesium case with rubber bumpers and gaskets. It clearly sets the standard in ruggedness, versatility and water resistance. It is actually submersible (3 feet for 30 minutes). There is even an optional submersible speaker mic. The Yaesu display at the Dayton Hamvention 2002 featured the VX7R submerged over 1 meter and powered for over 8 hours!

Frequency range: TX: 50-54 / 144-146 / 430-440 MHz (Europe)
TX: 50-54 / 144-148 / 222-225 / 440-450 MHz (USA)
RX: 0.5-999 MHz (Cellular blocked in the US)
Mode: TX: AM/FM
RX: AM/FM/WFM
RF Power output: Hi: 5/5/5
Low3: 2.5/2.5/2.5 W
Low2: 1/1/1 W
Low1: 0.5/0.5/0.5 W
0.3 W (220 MHz, FM), 1 W (50 MHz, AM)
Sensitivity: N/A
Selectivity: N/A
Image rejection: N/A
Voltage: 7.2 VDC (internal), 10-16 VDC (external)
Current drain: RX: 25-200 mA
TX: 0.6-1.8 A
Impedance: 50 ohms, SMA
Dimensions (W*H*D): 60*90*28 mm
Weight: 250 gr
Manufactured: 2002-200x
Other: 500 memories. Waterproof/submersible. Twin RX

DJ-G5 2m + 70cm FM Handheld Transceiver

Price € 499.00

Here is a versatile dual-band performer, with Alinco's Channel Scope graphic band activity display. Includes 80 memory channels (plus CALL) for each band, expandable up to 100. Operate V/U, U/V, V/V or U/U, full duplex capability. Three programmable scan ranges, Autodial memories, large illuminated display and keypad. Programmable second PTT button for Hi/Low power, VHF/UHF or tone burst. CTCSS encode and decode, European tone bursts, RF attenuator for use with external antenna or in high intermod environments, two VFOs for each band, direct frequency entry from keypad, DTMF squelch encode and decode, independent TX/RX indicators for Left and Right band displays.

Advanced Channel Scope
Alinco designed the advanced channel scope function to give you visual monitoring capability of multiple frequency activities. In either of the VFO/memory modes, press the search key, and with just a glance of the display, you can easily locate vacant frequencies and identify local repeater activities.

• Tx: 144 ~ 148___430 ~ 440 MHz FM
• Backlit screen
• 80 VHF___80 UHF memory channels
• 2W Power output
• Sweep Scan
• Full Duplex between VHF and UHF
• CTCSS tone squelch
• 20 autodialers
• DSQ selective call
• X-Band repeater
• Low Battery indicator
• Direct frequency entry keypad
• Channel Scope

Alinco DJ-195

Amateur VHF

Price € 299.00

Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/196 sports an alphanumeric display for easy memory management. It has an ergonomic design that's "user friendly" and the 5 watt output battery is standard. You'll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/196 retains the proud Alinco tradition of quality construction and excellent value.

Freq. RX original status 130 to 174 F2 F3 only
F2,F3,WFM

Freq. TX 144-147.995
Freq. Stability +/-5ppm(-10 to +60c)
Antenna Imp. 50 ohm unbalanced
Supply Voltage DC 13.8V rated
DC 6.0min to 16V max
Ground Negative GND
Current consumption TX 5W 1.2A approx.
at 13.8V external source RX 200mA approx/300mW
RX squelched 50mA approx.
RX Batt.Save on 20mA app.
Operating Temp. range -10 to +60 degrees C.
Dimention w/o projection 56(W) x 124(H) x 40 (D)

Alinco DR-135

Price € 399.00

The Alinco DR-135 series features a full-featured 2 Meter 50 watt FM transceiver with an alphanumeric display (up to seven characters), 100 memory channels aircraft (AM) plus extended receive. Three power outputs (50/10/5 watts) are available. CTCSS encode and decode are standard. The receive range is 118-135.995 MHz (AM) and 136-173.995 MHz (FM). This radio is 5.55 x 1.61 x 6.06 inches 1.9 Lbs (141x41x154mm 0.86 kg). Enter the digital age with the optional EJ-40U. The DR-135 series each include the EMS-56 DTMF Hand Mic, mobile bracket, DC cord, alarm cable and mounting hardware.

Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 118-174 MHz
Steps: 5/8.33/10/12.5/15/20/25/30/50 KHz
Mode: TX: FM/NFM
RX: AM/FM/NFM
RF Power output: Hi: 50 W
Mid: 10 W
Lo: 5 W
Sensitivity: Less than -16 dBu (-12 dB SINAD)
Selectivity: FM: 12 KHz or more (-6 dB), 28 KHz or less (-60 dB)
NFM: 6 KHz or more (-6 dB), 16 KHz or less (-60 dB)
Image rejection: N/A
Voltage: 13.8 VDC +/- 15%
Current drain: RX: 400 mA (squelched)
TX: Max 11 A
Impedance: 50 ohms, BNC
Dimensions (W*H*D): 142*40*174 mm
Weight: 1.0 Kg

Alinco DJ-V5

Price € 549.00

Amateur VHF/UHF transceiver

Alinco introduces an exciting new VHF/UHF handheld-transceiver that will change the way you think about communications. The new Alinco DJ-V5 can fill a variety of roles and it does them all well. Loaded with technical features, 5 watts of output power and a wide array of operator conveniences, the DJ-V5 is an attractive newcomer in a compact package.

Alinco DJ-C1 + C4

Price € 99.00 eatch

The DJ-C1,C5 is an amateur radio “credit card” transceiver with VFO & 21 channels (1-20 + CALL). Has built-in microphone on front; requires external earphone or speaker-mike (2.5 mm plug). Transmits 0.3 W 144-148 MHz, receives 136-174 FM & 118-136 AM, via integral lithium-ion battery. The extend-able (& breakable!) antenna must be in fully extended position & straight up when transmitting.

Frequency Coverage: VHF TYPE C1
TX: 144 ~ 147.995MHz
RX: 118 ~ 173.995MHz

Frequency Coverage:UHF TYPE C4
TX: 420 ~ 449.995MHz
RX: 420 ~ 449.995MHz
Signal Type: NFM, F3E
Receiver System: Double Conversion Super-heterodyne
Channel Step: 5KHz, 10KHz, 12.5KHz, 15KHz, 20KHz, 25KHz, 30KHz, 50KHz
Memory Channels: 50 memory channels
Tone Encoder: 39 tone encoder standard
Tone Decoder: 26 tone decoder standard
Offset range: 0 ~ 99.995MHz
Deviation: +/- 5KHz
TX Output: 300mW
TX Spurious emissions: Not more than -60dB
Frequency Stability: + or - 5ppm (-10 ~ + 50 degrees C.)
Sensitivity: Better than -15dBu (12dB SINAD)
Selectivity: -6dB/+ or - 12KHz
I.F.: (1st) 21.7MHz / (2nd) 450KHz
Power Supply Requirements: Internal 3.7vDC Lithium-ion battery (rechargeable)
Current Consumption: TX: 240mA [VHF], 300mA [UHF]
RX (squelched): 30mA [VHF], 40mA [UHF]
Operating Temperature: -10 ~ +60 degrees C, 14 ~ 140 degrees F
Dimensions: 56(W) x 94(H) x 13.6(D)mm (without projections)
Weight: approx. 85g

FT-897D

HF/VHF/UHF transceiver

 Price € 1200

The FT897D has been purpose built into a rugged die-cast aluminimium box especially for heavy-duty operation. It is powered from a variety of sources from 230V AC, to Ni-MH (optional) or from an external 13.8V DC supply. Despite its ultra compact size the FT897D is never-the-less a high performance 100W HF+ 6m, 50W 2m and 20W 70cm transceiver. It covers most of the major modes and is very easily controlled from the front panel.The tuning knob is in the centre of the front panel of the rig with the rest of the controls ergonomically placed either side. Apart from the microphone and headphones the rest of the sockets are out of the way on the rear panel. A feature picked up from the FT817ND is the multi-coloured dot-matrix display. This has proved an invaluable aid not only in displaying the frequency but other details as well such as a spectrum scope.

MFJ-945E Mobile ATU

 Price € 219.00

* 1.8-52MHz * 300W max * Now includes 6m * Cross needle meter * VSWR & 30/300W power meter * Illumination lamp * Tuning and reactance controls * Inductor switch * SO-239 sockets * Rear earth terminal * Antenna by-pass switch * Size 210 x 150 x 60mm * Weight 865g

Designed for mobile use, it can also be used for base station operation where coax feed systems are employed. Enables you to operate beyond the normal narrow bandwidth of most mobile antennas.

Price € 760.00

Aviator Pilot tranceivers by Yaesu are the result of over 40 years of engineering experience in communications and handheld tranceiver design.

The Aviator series are the world's only airband tranceivers that are rugged enough to pass stringent MIL-STD 810 testing. The durable high impact housing and unique clam shell chassis assures reliable operating adverse conditions. And Yaesu's extensive rubber gasketing system around the housing seams, key pad, knobs, microphone jacks and speaker grill insures that the Yaesu Aviator sets a new standard for water resistance among airband tranceivers available today!

Frequency Range: TX: 118.000 - 136.975 MHz (COM Band)
RX: 108.000 - 117.975 MHz (NAV Band)
118.000 - 136.975 MHz (COM Band)
Weather Channels (WX-01 - WX-10)
Channel Spacing: 25 kHz
Emission Type: TX: AM
RX: AM, FM
Supply Voltage: 6.0 - 15.0 VDC
Current Consumption: 53 mA (Squelch Off)
175 mA (RX)
804 mA (TX - 1.5 W)
Temperature Range: -10oC - +60oC
Case Size (W/H/D): 57 x 99 x 39 mm w/FNB-41
Weight: (approx): 365 grams (with FNB-41, Antenna, and belt clip)